EasyLine DIP switch L-LV


For installation in Linear light fixtures

Linear SELV LED drivers with integrated DIP switch interface for individual setting of the output current.

Product benefits

  • Product guarantee: 5 years
  • SELV
  • Selectable output current via DIP switch
  • Very low ripple: < 1%
  • Long service life: up to 100.000 hrs.

Choose a variant:

EasyLine DIP switch L-LV

Ref. No. Type Max. output power at AC operation Family data sheet Isolation primary - secondary Length Width Height Weight
187547 ECXe 350.722 18 W SELV 210 mm 30 mm 21 mm 118.3 g
187548 ECXe 650.723 33 W SELV 210 mm 30 mm 21 mm 130.3 g
187549 ECXe 1050.724 42 W SELV 210 mm 30 mm 21 mm 138.7 g
187550 ECXe 1500.725 61 W SELV 280 mm 30 mm 21 mm 186.8 g
Ref. No. Type Max. output power at AC operation Output current Min. output voltage Max. output voltage Output ripple (100 Hz) SVM value Current setting / Configuration Output current tolerance – Output current tolerance +
187547 ECXe 350.722 18 W
15 V 15 V 15 V 15 V
51 V 51 V 51 V 51 V
3 % < 0.4 DIP switch -7.5 % 7.5 %
187548 ECXe 650.723 33 W
15 V 15 V 15 V 15 V
51 V 51 V 51 V 51 V
1 % < 0.4 DIP switch -5 % 5 %
187549 ECXe 1050.724 42 W
15 V 15 V 15 V 15 V 15 V 15 V 15 V 15 V
51 V 51 V 51 V 48 V 46 V 44 V 40 V 38 V
1 % < 0.4 DIP switch -5 % 5 %
187550 ECXe 1500.725 61 W
15 V 15 V 15 V 15 V 15 V 15 V 15 V 15 V
51 V 50 V 48 V 46 V 45 V 42 V 42 V 40 V
1 % < 0.4 DIP switch -5 % 5 %
Ref. No. Type Max. output power at AC operation Min. voltage Max. voltage Min. input voltage AC Max. input voltage AC Min. mains frequency Max. mains frequency Input current at 230 V AC with max. load Power factor at full load (230 V) Efficiency at full load (230 V) THD at full load (230 V) Standby power No-load standby power Networked standby power Inrush current Inrush current time at 50% Ipeak Time to light on in AC operation
187547 ECXe 350.722 18 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 91 mA 0.969 86.6 7.66 % ≤ 0.3 W ≤ 0.3 W ≤ 0.3 W 13.6 A 118 µs 42 ms
187548 ECXe 650.723 33 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 164 mA 0.975 0.91 3.57 % ≤ 0.3 W ≤ 0.3 W ≤ 0.3 W 17.4 A 154 µs 42 ms
187549 ECXe 1050.724 42 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 194 mA 0.982 90.1 3.65 % ≤ 0.3 W ≤ 0.3 W ≤ 0.3 W 16.8 A 162 µs 42 ms
187550 ECXe 1500.725 61 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 297 mA 0.956 91.1 3.47 % ≤ 0.3 W ≤ 0.3 W ≤ 0.3 W 36.7 A 188 µs 32 ms
Ref. No. Type Max. output power at AC operation Min. input voltage DC Max. input voltage DC Input current at max. V DC with max. load Switching time AC - DC Switching time DC - AC Time to light on in DC operation
187547 ECXe 350.722 18 W 176 V 280 V 71 mA 298 µs 302 µs 52 ms
187548 ECXe 650.723 33 W 176 V 280 V 129 mA 310 µs 304 µs 48 ms
187549 ECXe 1050.724 42 W 176 V 280 V 154 mA 316 µs 308 µs 56 ms
187550 ECXe 1500.725 61 W 176 V 280 V 231 mA 298 µs 302 µs 42 ms
Ref. No. Type Max. output power at AC operation Dimmable DALI power supply integrated Min. dimming level Max. dimming level
187547 ECXe 350.722 18 W No No 100 % 100 %
187548 ECXe 650.723 33 W No No 100 % 100 %
187549 ECXe 1050.724 42 W No No 100 % 100 %
187550 ECXe 1500.725 61 W No No 100 % 100 %
Ref. No. Type Max. output power at AC operation Isolation primary - secondary Open circuit voltage (Umax.) Protection against transient main peaks L–N Protection against transient main peaks L/N–PE Leakage current over PE
187547 ECXe 350.722 18 W SELV 59 V 2 kV 2 kV 1.91 mA
187548 ECXe 650.723 33 W SELV 59 V 2 kV 2 kV 2.12 mA
187549 ECXe 1050.724 42 W SELV 59 V 2 kV 2 kV 1.48 mA
187550 ECXe 1500.725 61 W SELV 59 V 2 kV 2 kV 2.25 mA
Ref. No. Type Max. output power at AC operation
187547 ECXe 350.722 18 W
187548 ECXe 650.723 33 W
187549 ECXe 1050.724 42 W
187550 ECXe 1500.725 61 W
Ref. No. Type
187547 ECXe 350.722
187548 ECXe 650.723
187549 ECXe 1050.724
187550 ECXe 1500.725
Ref. No. Type 2D data 3D data
187547 ECXe 350.722
187548 ECXe 650.723
187549 ECXe 1050.724
187550 ECXe 1500.725

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com

Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com

To complement our LED range, we offer secondary optics and reflectors from our partners Carclo (www.carclo.com) and LEDiL (www.ledil.com). The product range includes a large selection of optics, optic holders and reflectors made of PMMA and silicone. We specifically stock up on a wide range of products to match the LEDs from CREE and Nichia we offer.




We develop and produce a variety of LED optics for shop, office, hall and street lighting for you. Optics are available in various designs (round, square, linear) made of high-quality materials (PMMA, silicone) and with any beam angles (narrow/wide, asymmetrical or combined).

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com


Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com