PrimeLine DIP switch C-R3 DALI2


For recessed or independent operation of compact luminaires (spotlights or downlights)

Compact SELV LED drivers with DALI2 dimming interface and individual setting of output current via dip-switch.

Product benefits

  • Dimmable: DALI (Ed. 2)
  • Product guarantee: 5 years
  • SELV
  • Selectable output current via DIP switch
  • Suitable for built-in into furniture
  • Suitable for emergency escape lighting systems acc. to EN 50172
  • Very low ripple: < 3%
  • With integrated cord grip for independent operation
  • Long service life: up to 100.000 hrs.

Choose a variant:

PrimeLine DIP switch C-R3 DALI2

Ref. No. Type Max. output power at AC operation Family data sheet Isolation primary - secondary Length Width Height Weight
186762 ECXd 1050.299 38 W SELV 97.2 mm 43.2 mm 30.1 mm 100 g
186763 ECXd 1050.299 38 W SELV 146.5 mm 43.2 mm 30.1 mm 139 g
Ref. No. Type Max. output power at AC operation Output current Min. output voltage Max. output voltage Output ripple (100 Hz) Current setting / Configuration Output current tolerance – Output current tolerance +
186762 ECXd 1050.299 38 W
10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V
54 V 54 V 54 V 54 V 54 V 54 V 54 V 54 V 54 V 51 V 48 V 45 V 43 V 40 V 38 V 36 V
3 %
  • DALI
  • DIP switch
-5 % 5 %
186763 ECXd 1050.299 38 W
10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V
54 V 54 V 54 V 54 V 54 V 54 V 54 V 54 V 54 V 51 V 48 V 45 V 43 V 40 V 38 V 36 V
3 %
  • DALI
  • DIP switch
-5 % 5 %
Ref. No. Type Max. output power at AC operation Min. voltage Max. voltage Min. input voltage AC Max. input voltage AC Min. mains frequency Max. mains frequency Input current at 230 V AC with max. load Power factor at full load (230 V) Efficiency at full load (230 V) THD at full load (230 V) Standby power No-load standby power Networked standby power Inrush current Inrush current time at 50% Ipeak
186762 ECXd 1050.299 38 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 190 mA 0.95 0.9 10 % no standby operation possible no load operation not intended ≤ 0.5 W 5 A 50 µs
186763 ECXd 1050.299 38 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 190 mA 0.95 0.9 10 % no standby operation possible no load operation not intended ≤ 0.5 W 5 A 50 µs
Ref. No. Type Max. output power at AC operation Min. input voltage DC Max. input voltage DC Input current at max. V DC with max. load Switching time AC - DC Switching time DC - AC
186762 ECXd 1050.299 38 W 170 V 280 V 150 mA 1 µs 1 µs
186763 ECXd 1050.299 38 W 170 V 280 V 150 mA
Ref. No. Type Max. output power at AC operation Dimmable Light control / dimming DALI power supply integrated DALI power supply switchable Min. dimming level Max. dimming level
186762 ECXd 1050.299 38 W Yes
  • Dimming interface DALI
  • PUSH
No No 1 % 100 %
186763 ECXd 1050.299 38 W Yes
  • Dimming interface DALI
  • PUSH
No No 1 % 100 %
Ref. No. Type Max. output power at AC operation Isolation primary - secondary Open circuit voltage (Umax.) Protection against transient main peaks L–N
186762 ECXd 1050.299 38 W SELV 59 V 2 kV
186763 ECXd 1050.299 38 W SELV 59 V 2 kV
Ref. No. Type Max. output power at AC operation EU Declaration of Conformity CB certificate ENEC certificate
186762 ECXd 1050.299 38 W
186763 ECXd 1050.299 38 W
Ref. No. Type Max. output power at AC operation 2D data 3D data
186762 ECXd 1050.299 38 W
186763 ECXd 1050.299 38 W
Ref. No. Type Max. output power at AC operation
186762 ECXd 1050.299 38 W
186763 ECXd 1050.299 38 W
Ref. No. Type
186762 ECXd 1050.299
186763 ECXd 1050.299
Ref. No. Type 2D data 3D data
186762 ECXd 1050.299
186763 ECXd 1050.299

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com

Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com

To complement our LED range, we offer secondary optics and reflectors from our partners Carclo (www.carclo.com) and LEDiL (www.ledil.com). The product range includes a large selection of optics, optic holders and reflectors made of PMMA and silicone. We specifically stock up on a wide range of products to match the LEDs from CREE and Nichia we offer.




We develop and produce a variety of LED optics for shop, office, hall and street lighting for you. Optics are available in various designs (round, square, linear) made of high-quality materials (PMMA, silicone) and with any beam angles (narrow/wide, asymmetrical or combined).

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com


Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com